3/24/08 from Caroyn C. who purchased #88-C:

"Gene,  I wanted to thank you... I made my own butter and the mold worked perfectly and was so beautiful.  My family couldn't believe I made it.  They also enjoyed the homemade biscuits I made from the buttermilk!

  Your work is wonderful and I really appreciate your

craftsmanship.  It's hard to find these days!"

Above,

Cow Butter Stamp

#89 $25.

3" dia., Knob Handle

#88-A - Acorns Design Butter Mold, $32.

3 pieces: threaded handle, 4" dia. bowl,  & mold

carved by Gene Wilson

Other 1/2 Lb. Butter Molds available are adapted

from our 3" diameter cookie stamp designs shown at left:

      #88-S. Strawberry $34.

      #88-R. Rose $34.

   

A bit of butter mold history...  Butter molds were first used centuries ago in northern Europe.  Today, most of the oldest molds to found in museums date to the mid-18th century Europe and North America.  In the 19th century, dairies became commercial and butter - as well as the wooden butter mold - was widely mass-produced.  Antique molds of the late 19th and early 20th century are often found in personal collections.  Antique American butter molds have, in the past forty years, become popular Americana collectibles and greatly increased in value.  Such molds are - due to their condition - best used as decorative accent pieces.

It is as rare to find modern butter molds as it is to find someone who knows how to use them.  Instructions for use of a modern butter mold: 1 - Soak the mold in ice water for 30 minuutes and -if convenient - refrigerate the mold for 30 minutes more.  This helps to keep the butter from sticking in the mold.  2 - Rinse the mold with cold water and fill it with softened butter.  3 - Smooth the surface with a spatula and cover with plastic wrap.  4- Chill for 2 hours or more. 

5 - To unmold the butter, run the tip of a knife around the outside edge to loosen it.

Cleaning wooden molds: Use hot water, mild soap, and a brush to loosen  residue - but do not soak the mold in water.  Reconditioning wooden molds: Mineral oil may be used to recondition a mold and prevent drying and cracking.

Vegetable oil should not be used. 

Food professional teacher, Alice Ross, writes of butter making and moulding

(Hearth-to-Hearth, October 2000):

If you want to try it yourself, the trick in a successful casting is to first soak and chill the mold.

Then, after packing the butter in, refrigerate until firm, and then pop out into a plate.

If you want to make your own butter to match the handsome form, all you need is fresh whipping cream.

Whisk or beat past the whipped cream stage until the butterfat forms firm yellow lumps and separates

from the remaining buttermilk.  (Save the buttermilk: let it sit out at room temperature overnight

to culture, and either drink it or use it in cooking.)  Paddle and press the butter in several washes

of cold water until there are no traces of buttermilk left.  Salt if desired.

Pack into soaked and chilled wooden molds, refrigerate to harden and then un-mold."

Hand-carved  butter molds of cherry and beech hardwoods.

Antique buttermolds designs are faithfully carved by woodcarver Gene Wilson -  one of the last butter mold carvers in America.

This page was last updated on: May 15, 2008

American Cherry

Hardwood

Acorn ButterMold

1/2 Pound Size ~ $32.

If these are to be used with butter, we suggest  you order unfinished .

Strawberry,  Acorns,

or Rose

Butter Molds and Butter Stamps ~ Hand Carved by "America's Cookie Mold Carver" Gene Wilson

3/12/07: "I bought two of your butter molds several years ago (which I love!!!)  ...to mold butter, I usually freeze the molds for 30 minutes, and if the butter isn't too soft, then mold it immediately and the molded butter pops right out.  If the butter is too soft, just throw it in the freezer for another 30 minutes.

I've never had any problem with the butter coming out with this technique!!"      Rita Jansing

At left:  Gene hand threads each of his carved and lathe turned butter mold rounds. This is the old fashioned way to fit the carved portion of the mold and the handle together - so they may be taken apart for cleaning.

HOBI Cookie Molds

~ We sell only original woodcarvings, not resin copies ~

American Crafted ~ Old World Style ~ Universal Appeal

"We are a living history museum in Ohio portraying rural life in the 1860's.  Thank you

for creating such accurate molds!  Only the best past muster here, and once I saw

your butter molds, I knew I had found a treasure.  When working in front of the public

(as a housewife living  her "life" in 1861).

I use the historic method for molding butter - a completely dry mold dusted

with flour, and slightly chilled butter.  The butter comes out nicely 90% of the time.

It's worth a try.  Thanks again for the beautiful craftmanship!"

Heather Faur, Hale Farm and Village, OH

Cow

Butter Mold

1/2 pound size

Cherry Wood

# 88-C  $39.

Prices subject to change.  Major changes in our prices and offerings after June 1, 2008.

Orders postmarked after June 1, 2008 will be not be filled at our previously advertised prices.

Current Catalog

Expires May 31st

New Catalog

Not Available

Until September '08

New Web Site Offerings

will be posted throughout

Summer '08